Post by account_disabled on Dec 14, 2017 4:12:00 GMT -5
Hi,
I'm using a chatbot who was originally developed with a raspberry pi 2B.
I've changed the mainboard to RP 3 b to profit from wifi and bluetooth.
I've plugged the extension board of the robot on to RP 3 GPIO (40 pins).
Everything is working - speech recognition, eyes blinking - except the servo motors...
The chatbot used to move his head and his arms while talking, but he is now motionless.
Do you have any idea to explain and correct this problem?
I'm new to Raspberry pi and Linux.
Thanks.
I didn't find the right solution from the internet.
References:
www.raspberrypi.org/forums/viewtopic.php?t=195979
Animation Video Marketing
I'm using a chatbot who was originally developed with a raspberry pi 2B.
I've changed the mainboard to RP 3 b to profit from wifi and bluetooth.
I've plugged the extension board of the robot on to RP 3 GPIO (40 pins).
Everything is working - speech recognition, eyes blinking - except the servo motors...
The chatbot used to move his head and his arms while talking, but he is now motionless.
Do you have any idea to explain and correct this problem?
I'm new to Raspberry pi and Linux.
Thanks.
I didn't find the right solution from the internet.
References:
www.raspberrypi.org/forums/viewtopic.php?t=195979
Animation Video Marketing